
Read the listing before it meets the weather.
Resin patio tables
Resin from top to base. 5 tables here: a folding pair at 30 and 42 inches, a fixed resin table at dining height, and two sets, one with a wicker look and a laminate top. The first question is the night. If the walkway has to be bare when you lock up, the folding tables earn their spot.
5 listed products · Prices in USD · Options on each product

A closer look at this selection



Actual product images. Open a piece to see its available options.
Other furniture departments
Filter products


Outdoor
Resin Wicker-Look Outdoor Table Set, Laminate Top
- Laminate top
- Listed for patio use



Outdoor
Folding Resin Bar Table, Outdoor Patio
- Resin top
- Listed for patio use
Resin patio tables
Know the wind, the sun and the curb line
Read the frame line first, then the seat: aluminum, resin, synthetic teak and coated steel all live outside. A few models are marked for covered patios only, so put those under a roof or an awning. Slatted seats shed a shower faster than solid ones, and a stackable chair cuts the nightly breakdown in half.
Folding is the draw for two of these resin patio tables, a help when the walkway has to be clear by midnight, and that pair comes in table height and bar height.
Identify the actual surface
Read the product description for the resin material or surface system, its listed use, and the available finish. Similar marble or wood effects can sit on different constructions with different care instructions.
Check the stated use
Read the listed indoor or outdoor use and the material details for each product. A patio photograph or a similar-looking finish is not a substitute for the product description.
Resin from top to base. 5 tables here: a folding pair at 30 and 42 inches, a fixed resin table at dining height, and two sets, one with a wicker look and a laminate top. The first question is the night. If the walkway has to be bare when you lock up, the folding tables earn their spot.
The folding pair
Out at eleven, folded by midnight. The folding resin table stands 30 inches tall, weighs 27 pounds, and comes with a square or round top, at around $111. Its bar-height twin stands 42 inches and weighs 28 pounds, a quick high-top for a rail that only fills on weekends.
Folded, they lean against a back wall or slide behind a door. That is the whole point on a sidewalk where the pavement has to be clear overnight.
Fixed tables and sets
The resin table at dining height stays set: rectangular or square, 30 pounds, listed for patio use. It suits a courtyard that keeps its furniture out all season under covers.
Two table sets each sell as a single line. One is all resin at 30 pounds. The other pairs a wicker look with a laminate top and weighs 42 pounds. A set is the quick route to a few two-tops along the window.
Choosing and caring
Resin wipes down after service and takes a rinse after a storm. It still wants a cover or a dry corner when the season ends, and outdoor furniture left out without care falls outside the warranty.
Sizes and shapes sit on each listing. Plan on two feet of edge for every guest, and keep 18 to 24 inches clear at each chair back. A square at 30 by 30 gives two diners room for plates; for four, look at 36 inches or more.
Prices start around $111 for the folding table and reach about $241 for the fixed table.
Weight is the trade. These tables run 27 to 42 pounds, easy to move and light enough that a rooftop gust deserves respect. Set them where a wall or a parapet breaks the wind, close any umbrella nearby before the weather turns, and pair the 42-inch table with stools near 30 inches.
Chairs that match the material sit in resin patio chairs, and the whole resin range, from bar stools to tops, in resin patio furniture. For other materials, compare patio tables. Sketch the space in an outdoor plan and note which tables fold, so the closing crew knows what goes where.
Related reading